DON'T DO WHAT I DID, AVOID DRILLING THRU WIRING BY REMOVING INTERIOR CARPET FIRST
The insulation is pop riveted with "penny" washers
on: The Underfloor
The Tunnel sides
The Tunnel top
2005 Experiments Based on Jason Leung's work (see "REPAIRS - Exhaust")
DON'T DO WHAT I DID, AVOID DRILLING THRU WIRING BY REMOVING INTERIOR CARPET FIRST
The insulation is pop riveted with "penny" washers
on: The Underfloor
The Tunnel sides
The Tunnel top
|
Despite this insulation, floor heat inflow commences immediately aft of the shield, the insulation on its own cannot block the heat. |
|
|
A close up. The insulation spans the distance between the chassis frames to which it is tucked into.
The insualtion consist of: 1 layer of 1/16" Semi rigid fibre glass mat The whole mat was sewen together to become a unit. |
|
