A PICAXE-08M MINI REPEATER CONTROLLER
A BARE BONES PICAXE-08M REPEATER CONTROLLER - Programmed in "BASIC"!!!
PICAXE-08M Controller Art Work PICAXE-08M Controller Schematic PICAXE-08M Controller "BASIC" Program
NOTE: For best results, print out the circuit board artwork using a laser printer with a fairly new toner cartridge and print the circuit board image at
2.93" wide by 2.68" high.
This was my first attempt at a bare bones repeater controller board using a PICAXE-08M. I actually never hooked it up to any radios since I rapidly moved up to a PICXE-18X design. If you're keen, everything should be here. Artwork, schematic and the program code. Feel free to make any improvements to this project. If you've never tackled etching a circuit board before, possibly have a read of the PICAXE-18X project. Have Fun!